Metabo SBE 1000 Spezifikationen Seite 14
- Seite / 98
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
14
ENGLISH
ENG
Opening the chuck:
Grip the retaining ring and,
using the other hand, rotate the sleeve in the direc-
tion of the arrow -1-.
Clamping the tool:
Insert tool -2- as far as it will
go. Grip the retaining ring and, using the other
hand, firmly rotate the sleeve as far as it will go in
the direction of the arrow -3-.
8.10 Tool change with
Plus (5)
chuck
See illustrations B on page 3.
Opening the drill chuck:
Grip the retaining ring and, using the other hand,
rotate the sleeve in the direction of the arrow -1-.
The grating sound (depending on function) which
may be heard after opening the drill chuck is
stopped by turning the sleeve in the opposite
direction.
If the chuck is very tightly secured,
disconnect
from mains. Hold the chuck using an open-end
spanner at the flats on its head, and turn the sleeve
vigourously in the direction of the arrow -1-.
Clamping the tool
- Insert the tool -2- as far as it will go.
- Grip the retaining ring and, using the other hand,
rotate the sleeve in the direction of the arrow -3-
until the mechanical resistance which can be felt
is overcome.
-
Caution! The tool is not yet fully clamped!
Keep turning the sleeve (
it must "click" when
turning
) until it cannot be turned any further -
only now
is the tool
securely
clamped.
In the case of a soft tool shank, retightening may
be required after a short period of drilling.
8.11 Tool change with a geared chuck (4)
See illustrations C on page 3.
Opening the chuck:
Opening a geared chuck with
the chuck key -1-.
Clamping the tool:
Insert tool -2- as far as it will
go and tighten equally in all 3 bores using the
chuck key -3-.
8.12 Unscrewing the chuck
Futuro Top keyless chuck
(6)
(see illustration X on second to last page)
Unscrew the drill chuck with two open-end span-
ners.
Futuro Plus keyless chuck (5)
(see illustrations Y on second to last page)
Undo the locking screw. Caution! Left-handed
thread!
Grip the drill spindle using an open-end spanner.
Insert an Allen key into the chuck, tap on it with a
rubber hammer to loosen the chuck, and then
unscrew.
Geared chuck
(4)
(see illustrations Z on second to last page)
Undo the locking screw. Caution! Left-handed
thread!
Grip the drill spindle using an open-end spanner.
Insert the chuck key into the chuck, tap on it with
a rubber hammer to loosen the chuck, and then
unscrew.
In the case of deep bores pull the drill bit out of the
bore from time to time in order to remove the stone
dust or shavings.
Drill tiles and other brittle materials without impact.
Switch on the impulse function (SBE 900 Impuls
only) for drilling without a centre punch.
The drill chuck can be removed for screwdriving.
Insert screwdriver bit directly into the spindle's
hexagon socket. If a bit clamping bush (order no.
6.31281) is fitted, the screwdriver bit is held in
position.
For thread tapping (except SB 710), apply some oil
to the tap. Select a low speed and the first gear.
Start cutting in clockwise direction, stop and turn
out in counter-clockwise direction.
Cleaning the keyless chuck:
After prolonged use hold the chuck vertically, with
the opening facing down, and fully open and close
it several times. The dust collected falls from the
opening. Regular use of cleaning spray on the jaws
and jaw openings is recommended.
If it is not possible to press in the trigger (13), check
if the rotation selector switch (11) is fully at position
R or L (except SB 710).
SBE 900 Impuls: If the setting wheel (9) is moved
from impulse function to torque control while the
machine is switched on, the machine switches off
automatically. Switch the machine off and then
back on again.
Electronic signal display (10)
Rapid flashing - restart protection
(SBE 1000, SBE 1100 Plus)
9Tips and Tricks
10 Cleaning, Maintenance
11 Troubleshooting
17027063_1110 SB_Bauk10.book Seite 14 Dienstag, 23. November 2010 2:03 14
- 170 27 0630 - 1110 1
- Made in Germany 1
- Originalbetriebsanleitung 5
- 5Überblick 6
- 6 Besondere 6
- Produkteigenschaften 6
- 7 Inbetriebnahme 7
- 8 Benutzung 7
- (SBE 1000, SBE 1100 Plus) 9
- 15 Technische Daten 10
- Original instructions 11
- 5Overview 12
- 6 Special Product Features 12
- 7 Initial Operation 12
- 11 Troubleshooting 14
- 9Tips and Tricks 14
- 10 Cleaning, Maintenance 14
- 12 Accessories 15
- 13 Repairs 15
- 14 Environmental Protection 15
- 15 Technical Specifications 15
- Notice originale 17
- 5Vue d'ensemble 18
- 6 Particularités du produit 18
- 7 Mise en service 19
- 8 Utilisation 19
- FRANÇAIS 20
- 15 Caractéristiques 22
- NEDERLANDS 23
- 5Overzicht 24
- 6Bijzondere 24
- 7 Inbedrijfstelling 25
- 8Gebruik 25
- 9 Handige tips 26
- Istruzioni originali 29
- 5 Vista complessiva 30
- 6 Caratteristiche specifiche 30
- 7 Messa in funzione 31
- 8 Utilizzo 31
- ITALIANO 32
- 9 Suggerimenti pratici 33
- 10 Pulizia, manutenzione 33
- 11 Eliminazione dei guasti 33
- 12 Accessori 33
- 13 Riparazione 34
- 14 Tutela dell'ambiente 34
- 15 Dati tecnici 34
- Manual original 35
- 5 Descripción general 36
- 6 Características especiales 36
- 7 Puesta en marcha 37
- 9 Consejos y trucos 39
- 10 Limpieza, mantenimiento 39
- 11 Localización de averías 39
- 12 Accesorios 39
- 13 Reparación 40
- 14 Protección ecológica 40
- 15 Especificaciones técnicas 40
- 5Vista geral 42
- 6 Características especiais 42
- 7 Colocação em operação 43
- 8 Utilização 43
- PORTUGUÊS 44
- 15 Dados técnicos 46
- Originalbruksanvisning 47
- 5Översikt 48
- 6Särskilda 48
- 7 Före användning 48
- 8Användning 49
- 9Tips och råd 50
- 10 Underhåll, rengöringl 50
- 11 Åtgärder vid fel 50
- 12 Tillbehör 51
- 13 Reparation 51
- 14 Återvinning 51
- 15 Tekniska data 51
- Alkuperäinen käyttöopas 52
- 5 Yleiskuva 53
- 7 Käyttöönotto 53
- 8 Käyttö 54
- 9 Neuvot ja ohjeet 55
- 10 Puhdistus, huolto 55
- 11 Häiriöiden poisto 55
- 12 Lisätarvikkeet 56
- 13 Korjaus 56
- 14 Ympäristönsuojelu 56
- 15 Tekniset tiedot 56
- Original bruksanvisning 58
- 5Oversikt 59
- 6Spesielle 59
- 7 Før bruk 59
- 9 Tips og triks 61
- 10 Rengjøring, vedlikehold 61
- 11 Utbedring av feil 61
- 12 Tilbehør 62
- 13 Reparasjon 62
- 14 Miljøvern 62
- 15 Tekniske data 62
- Original brugsanvisning 64
- 5Oversigt 65
- 6 Særlige 65
- 7 Ibrugtagning 65
- 8Anvendelse 66
- 9 Tips og tricks 67
- 10 Rensning, vedligeholdelse 67
- 11 Afhjælpning af fejl 68
- 13 Reparationer 68
- 14 Miljøbeskyttelse 68
- Oryginalna instrukcja obsługi 70
- 5Przegląd 71
- 6 Szczególne cechy produktu 71
- 7Uruchomienie 72
- 8Użytkowanie 72
- 9 Wskazówki i zalecenia 74
- 10 Czyszczenie, konserwacja 74
- 11 Usuwanie usterek 74
- 12 Akcesoria 74
- 13 Naprawa 75
- 14 Ochrona środowiska 75
- 15 Dane techniczne 75
- Πρωττυπο οδηγιών χρήσησ 77
- 5 Επισκπηση 78
- 6 Ιδιαίτερεσ ιδιτητεσ του 78
- 7 Θέση σε λειτουργία 79
- ΕΛΛΗΝΙΚΑ 80
- 9 Συµβουλέσ και τεχνάσµατα 81
- 10 Καθαρισµσ, συντήρηση 81
- 11 Άρση βλαβών 81
- 12 Εξαρτήµατα 82
- 13 Επισκευή 82
- 14 Προστασία περιβάλλοντοσ 82
- 15 Τεχνικά στοιχεία 82
- Eredeti használati utasítás 84
- 5Áttekintés 85
- 6 Különleges 85
- 7 Üzembe helyezés 86
- 8 Használat 86
- 9 Néhány jótanács és 87
- 10 Tisztítás, karbantartás 88
- 11 Hibaelhárítás 88
- 12 Tartozékok 88
- 13 Javítás 88
- 14 Környezetvédelem 88
- 15 Műszaki adatok 89
- 6 Особенности 91
- 7 Ввод в эксплуатацию 92
- 8 Эксплуатация 92
- 9 Советы и рекомендации 94
- 10 Очистка, техническое 94
- 11 Устранение 94
- Metabowerke GmbH 98
- 72622 Nürtingen, Germany 98
Verwandte Produkte und Handbücher für Rotationshämmer Metabo SBE 1000
(60 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 2.918 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern