Metabo ASE18 LTX Bare Gebrauchs- und Pflegehandbuch PDF herunterladen (Seite 11)

ENGLISH en

the guide serves as a pivot point around which the

machine is slowly aligned, whereby the saw blade

cuts into the workpiece.

On a regular basis, use compressed air to blow out

the machine through the rear ventilation slots.

Regularly clean the saw blade quick-clamping

device (5) and blow out with compressed air. Do not

oil or grease.

Use only genuine Metabo accessories.

See page 4.

Use only accessories which fulfil the requirements

and specifications listed in these operating instruc-

tions.

A Comprehensive range of saw blades for a wide

variety of materials and use cases

B Battery charger

C Battery packs

D Lubricating stick for cooling the saw blades

when sawing metal

For a complete range of accessories, see

www.metabo.com or the catalogue.

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service centre.

For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Battery packs must not be disposed of with regular

waste. Return faulty or used battery packs to your

Metabo dealer!

Do not allow battery packs to come into contact with

water!

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Guideline 2002/

96/EC on used electronic and electric equipment

and its implementation in national legal systems,

used power tools must be collected separately and

handed in for environmentally compatible recycling.

Before disposal, discharge the battery pack in the

power tool. Prevent the contacts from short-

circuiting (e. g. by protecting them with adhesive

tape).

Explanatory notes on the specifications on page 3.

Changes due to technological progress reserved.

U =Voltage of battery pack

=Stroke rate at idle speed

s=Stroke length

m =Weight (with smallest battery pack)

Measured values determined in conformity with EN

60745.

Direct current

The technical specifications quoted are subject to

tolerances (in compliance with the relevant valid

standards).

Emission values

Using these values, you can estimate the

emissions from this power tool and compare these

with the values emitted by other power tools. The

actual values may be higher or lower, depending on

the particular application and the condition of the

tool or power tool. In estimating the values, you

should also include work breaks and periods of low

use. Based on the estimated emission values,

specify protective measures for the user - for

example, any organisational steps that must be put

in place.

Vibration total value (vector sum of three directions)

determined in accordance with EN 60745:

h, CW

=Vibration emission level (sawing wood)

h,CW

=Uncertainty (vibration)

Typical A-effective perceived sound levels:

=Sound pressure level

=Acoustic power level

, K

= Uncertainty

During operation the noise level can exceed

80 dB(A).

Wear ear protectors!

8. Maintenance

9. Accessories

10. Repairs

11. Environmental Protection

12. Technical Specifications

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Metabo ASE18 LTX Bare Gebrauchs- und Pflegehandbuch Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kabellose Kombibohrer Metabo ASE18 LTX Bare